Large compressor systems might require two or more oil/water separators to be installed to match the total compressor capacity of an installation. To connect the oil/water separators together and to ensure an even distribution of condensate in to the oil/water separators, you require the DISTRIBUTOR. The DISTRIBUTOR ensures an equal distribution of the condensate in to the oil/water separators and the elements are subsequently saturated evenly.
The DISTRIBUTOR has two 1" condensate inlets and six 1/2" outlets with integrated ball valves, allowing you to connect two and up to six oil/water separators.
To service the DISTRIBUTOR simply loosen the 4 top screws and remove the lid. This will give you instant access to the inner working mechanism.
The depressurising chamber ensures compressed air condensate depressurisation and the subsequent distribution into the oil/water separators.
The DISTRIBUTOR is supplied with an installation kit.
Evenly distribution of condensate.
Installation kit included.
Easy to service.
|Oil/water separator connection points||6|
|Condensate inlet thread connection||1" BSP (2 off)|
|Inlet hose connection||26 mm (hose inner diameter)|
|Condensate outlet thread connection||1/2" BSP (6 off)|
|Outlet hose connection||15 mm (hose inner diameter)|
|Integrated ball valves||Yes|
|Installation kit included||Yes|
|Installation kit consists of:||Wall mounting bracket and fixing material, spirit level|