For years the AIR-SAVER has helped end-users to save valuable compressed air from escaping unnecessarily, reducing compressor running hours and thus extending its lifetime, saving energy and operating costs.
The AIR-SAVER is typically installed on the air outlet of the air receiver. Alternatively it is applied in larger factories to close off certain parts of the compressed air system, where during certain parts of the day no compressed air is required.
A typical compressed air system has air loss 24 hours per day through pipe works connections and leaking float type drains etc. By installing an AIR-SAVER the end user will limit these types of air losses to the operating hours only. At the end of the (department) working day the AIR-SAVER will close off the air flow and prevents further loss of valuable compressed air.
Now, with a new programming module!
The new control module offers programming simplicity and new enlightened display features, offering you more visual information.
Part numbers and pricing levels remain unchanged – even with these extra benefits.
Weekly time planner, offering you flexibility in selecting the open and closed cycles.
Remote control option, offering you the possibility to install the AIR-SAVER at a height.
Manual valve opening and closing possible, in case of a power failure.
|Pressure range||0 - 16 bar|
|Supply voltage options||115VAC or 230VAC 50/60Hz. (please indicate)|
|Opening/closing duration||30 sec. / 90°|
|Medium temperature||1 - 100 °C|
|Ambient temperature||1 - 50 °C|
|Illuminated LCD display||Indicating day, time, valve status, battery life|
|Programmable options||Weekplanner, max. 100 switching points, to be distributed over 1-7 days|
|Inlet/outlet connections||1" (BSP or NPT)|
|Valve housing material||Brass nickel plated|
|Environmental protection||IP54 (NEMA13)|